Interior ED4M

<kuid2:833171:101298:1>

Тип: Кабина
Загружено: 3.11.2024 16:28:59
Размер: 10.9 MB
Автор: Ilyon
Загрузил: Ilyon
Опубликовано: 3.11.2024 16:28:59
Скачиваний: 28
Скачать

Описание:

Interior for ED4M
Миниатюра:

Конфигурация:

username                                "Interior ED4M"
category-class                          "ZI"
category-region                         "RU"
category-era                            "2010s"
cameradefault                           6
description                             "Interior for ED4M"
kind                                    "interior"
author                                  "3d модель и текстуры: Dimaas, фотоматериал: Dimaas,ed4m"
trainz-build                            3.7
interior-controls-type                  "full"
cameralist
{
  camera0                               0.836,0.032,1.51,0.044,-0.142
  camera1                               0.331,0.506,1.492,-12.507,-0.257
  camera2                               -0.281,-0.482,1.134,-12.466,-1.434
  camera3                               -0.744,0.295,1.471,-12.579,-0.086
  camera4                               -1.099,0.078,0.774,-13.127,-0.61
  camera5                               -1.024,0.044,1.6,3.153,-0.328
  camera6                               0.82,0.58,1.743,0,-0.09
}
mesh-table
{
  default
  {
    mesh                                "cab_03x.im"
    auto-create                         1
  }
  bil_track_st
  {
    mesh                                "bil_track_st.im"
    att                                 "a.bil_spd_current01"
    auto-create                         1
  }
  bil_track_dv
  {
    mesh                                "bil_track_dv.im"
    att                                 "a.bil_spd_current01"
    auto-create                         1
  }
  bil_accel
  {
    mesh                                "rev_fwd.im"
    att                                 "a.bil_spd_max01"
    auto-create                         1
  }
  bil_decel
  {
    mesh                                "rev_back.im"
    att                                 "a.bil_spd_max01"
    auto-create                         1
  }
  bil_mode_p
  {
    mesh                                "bil_mode_p.im"
    att                                 "a.bil_light_p"
    auto-create                         1
  }
  bil_mode_m
  {
    mesh                                "bil_mode_m.im"
    att                                 "a.bil_light_m"
    auto-create                         1
  }
  bil_kp_ready
  {
    mesh                                "kr_wr.im"
    att                                 "a.bil_light_kr_wr"
    auto-create                         1
  }
  bil_rmp
  {
    mesh                                "knopki/bil_rmp.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.001
    notches                             0,1
    notchheight                         0,0
  }
  bil_vk
  {
    mesh                                "knopki/bil_vk.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.001
    notches                             0,1
    notchheight                         0,0
  }
  bil_f
  {
    mesh                                "knopki/bil_f.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.001
    notches                             0,1
    notchheight                         0,0
  }
  bil_0
  {
    mesh                                "knopki/0.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_1
  {
    mesh                                "knopki/1.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_2
  {
    mesh                                "knopki/2.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_3
  {
    mesh                                "knopki/3.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_4
  {
    mesh                                "knopki/4.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_5
  {
    mesh                                "knopki/5.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_6
  {
    mesh                                "knopki/6.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_7
  {
    mesh                                "knopki/7.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_8
  {
    mesh                                "knopki/8.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_9
  {
    mesh                                "knopki/9.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_up
  {
    mesh                                "knopki/up.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_down
  {
    mesh                                "knopki/down.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_k
  {
    mesh                                "knopki/k.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_l
  {
    mesh                                "knopki/l.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_o
  {
    mesh                                "knopki/o.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_i
  {
    mesh                                "knopki/i.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_p
  {
    mesh                                "knopki/p.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_plus
  {
    mesh                                "knopki/plus.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_minus
  {
    mesh                                "knopki/minus.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_otpr
  {
    mesh                                "knopki/otpr.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_podt
  {
    mesh                                "knopki/podt.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_os
  {
    mesh                                "knopki/oc.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_k20
  {
    mesh                                "knopki/k20.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bplocomain_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "needle_red.im"
    att                                 "a.needle-red"
    limits                              0,2100
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "needle_black.im"
    att                                 "a.needle01"
    limits                              0,1800
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "needle_black.im"
    att                                 "a.needle"
    limits                              0,1600
    att-parent                          "default"
  }
  bploco_equaliser
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "needle_red.im"
    att                                 "a.needle-red01"
    limits                              0,1800
    att-parent                          "default"
  }
  cab_voltmeter
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "kw_ed.im"
    att                                 "a.kw"
    limits                              0,4100
    angles                              0,4
    att-parent                          "default"
  }
  omivatel
  {
    mesh                                "omyv_klava/knopka_omyv.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.klava_omyv"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  buso_kn_wip_m
  {
    mesh                                "omyv_klava/knopka_wip_m.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.klava_omyv"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  buso_kn_wip_pom
  {
    mesh                                "omyv_klava/knopka_wip_pom.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.klava_omyv"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  left_door_otkr
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_door-left"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  right_door_otkr
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_door-right"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  dveri_mash_lev
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_ldoor_mash"
    angles                              0.8,-0.3
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  dveri_mash_prav
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_rdoor_mash"
    angles                              0.8,-0.3
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  dveri_pom_lev
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_ldoor_kond"
    angles                              0.8,-0.3
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  dveri_pom_prav
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler.im"
    att                                 "a.tumb_rdoor_kond"
    angles                              0.8,-0.3
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  torm_comb
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopki/knopka_black.im"
    att                                 "a.knopka_torm"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
    radius                              0.01
  }
  saut
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "per_plast.im"
    att                                 "a.per_saut"
    angles                              -0.5,0.25
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.01
    mousespeed                          10
  }
  buso
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "per_plast.im"
    att                                 "a.per_avarinoe"
    angles                              -0.5,0.25
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.01
    mousespeed                          10
  }
  osv_cab_low
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "per_plast.im"
    att                                 "a.per_svet"
    angles                              -0.5,0.25
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.001
    mousespeed                          10
  }
  osv_pult_reg
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "knopki/krutilka6.im"
    att                                 "a.krutilka_light-tusk"
    angles                              -2.8,2.1
    limits                              0,1
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,1,1,1,1
    radius                              0.01
  }
  osvpult_mach
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "knopki/knopka_podsvetki.im"
    att                                 "a.podsvetka_off01"
    angles                              0.35,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.01
    mousespeed                          -1
  }
  osvpult_pom
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "knopki/knopka_podsvetki.im"
    att                                 "a.podsvetka_off02"
    angles                              0.35,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.01
    mousespeed                          -1
  }
  vkl_upr
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "knopki/krutilka_f.im"
    att                                 "a.krutilka_on"
    angles                              -0.8,0.8
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.01
    mousespeed                          2
  }
  pant_up
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopki/knopka_black.im"
    att                                 "a.pantograph_lever"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
  }
  pant_down
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopki/knopka_red.im"
    att                                 "a.knopka_pant-down"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
  }
  avar_ept
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopki/knopka_black.im"
    att                                 "a.knopka_ept"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  otpusk
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopki/knopka_black.im"
    att                                 "a.knopka_otpusk"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
    radius                              0.001
  }
  throttle_lever
  {
    mesh                                "kontroller.im"
    auto-create                         1
    kind                                "lever"
    att                                 "a.thottle_lever"
    limits                              0,8
    angles                              0,1.5
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.9,1
    notchheight                         1,1,1,1,1,1,1,1,1
    radius                              0.1
    att-parent                          "default"
    mousespeed                          0.07
  }
  reverser_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "reversor.im"
    att                                 "a.reverser_lever"
    limits                              0,2
    angles                              -0.55,0.55
    notches                             0,0.5,1
    notchheight                         1,1,1
    mousespeed                          1
    att-parent                          "default"
    radius                              0.1
  }
  rb_1
  {
    mesh                                "rb.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rb02"
    limits                              0,1
    angles                              0,-0.003
    mousespeed                          10
    notchheight                         0,0
  }
  perekl_proj
  {
    kind                                "lever"
    mesh                                "knopki/krutilka1.im"
    att                                 "a.light_lever"
    auto-create                         1
    angles                              0,2
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.05
    mousespeed                          -1
  }
  bru
  {
    mesh                                "knopki/krutilka2.im"
    att                                 "a.ustavka_lever"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              0,4.8
    notches                             0,0.16,0.32,0.48,0.64,0.8,1
    notchheight                         2,2,2,2,2,2,2
    radius                              0.02
    mousespeed                          -0.3
  }
  av_km
  {
    mesh                                "knopki/krutilka2.im"
    att                                 "a.av_bru"
    auto-create                         1
    kind                                "lever"
    limits                              0,5
    angles                              0,2.8
    notches                             0,0.2,0.4,0.6,0.8,1
    notchheight                         2,2,2,2,2,2
    radius                              0.02
    mousespeed                          -0.3
  }
  av_rezhim
  {
    mesh                                "knopki/krutilka2.im"
    att                                 "a.av_rezhim"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              2.3,0.9
    notches                             0,1
    notchheight                         0,0
    radius                              0.02
    mousespeed                          -0.4
  }
  tiff
  {
    mesh                                "knopki/knopka_black.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka_tifon01"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  pedal
  {
    mesh                                "knopki/knopka_black.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.knopka_svistok01"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  trainbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "rukoyatka-395.im"
    att                                 "a.train_brake_lever"
    limits                              0,4
    angles                              1.8,-0.1
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,2,2,2,1
    radius                              0
    mousespeed                          -0.25
  }
  independantbrake_lever2
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "ruchnik.im"
    att                                 "a.ind_brake_lever"
    angles                              -3.2,0
    limits                              0,1
    att-parent                          "default"
    notches                             0,0.2,0.4,0.6,0.8,1
    notchheight                         0,0,0,0,0,0
    radius                              0.15
    mousespeed                          -0.3
  }
  doors_left
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_doors_left"
    angles                              -0.5,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  doors_right
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_doors_right"
    angles                              -0.5,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  pusk_sio
  {
    mesh                                "knopki/knopka_black.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.knopka_radio"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
    radius                              0.01
  }
  vozvrat
  {
    mesh                                "knopki/knopka_red.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.knopka_bv"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
  }
  kn_pesok
  {
    mesh                                "knopki/knopka_black.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.knopka_pesok"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
    radius                              0.01
  }
  knopka_red_mach
  {
    mesh                                "knopki/knopka_red.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.knopka_podsvetka-m"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  osvpult_man
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "knopki/krutilka6.im"
    att                                 "a.krutilka_svet01"
    angles                              -4.5,0.85
    limits                              0,1
    notches                             0,0.25,0.5,0.75,1
    notchheight                         0,0,0,0,0
    radius                              0.01
  }
  osv_indik
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "knopki/krutilka6.im"
    att                                 "a.krutilka_svet02"
    angles                              -4.5,0.85
    limits                              0,1
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,1,1,1,1
    radius                              0.01
  }
  reg_podsv_mach
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "knopki/krutilka2.im"
    att                                 "a.krutilka_podsvetka-tusk01"
    angles                              -0.8,3.5
    limits                              -1,2
    notches                             0,0.33,0.66,1
    notchheight                         1,1,1,1
    radius                              0.01
    mousespeed                          -1
  }
  reg_podsv_pom
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "knopki/krutilka6.im"
    att                                 "a.krutilka_podsvetka-tusk02"
    angles                              -3.9,0.15
    limits                              -1,2
    notches                             0,0.3,0.7,1
    notchheight                         1,1,1,1
    radius                              0.01
  }
  osvpult_volt
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "knopki/krutilka6.im"
    att                                 "a.krutilka_svet03"
    angles                              -4.5,0.55
    limits                              0,1
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,1,1,1,1
    radius                              0.01
  }
  pedal_p
  {
    mesh                                "knopki/knopka_black.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.knopka_tifon02"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  sw
  {
    mesh                                "knopki/knopka_black.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.knopka_svistok02"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  rb2
  {
    mesh                                "rb.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.rb01"
    limits                              0,1
    angles                              0,-0.006
    mousespeed                          1
    notchheight                         0,0
  }
  ept_on_off
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_ept"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  sign_verh
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_bf_red_verh"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    mousespeed                          1
    radius                              0.1
  }
  sign_niz
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_bf_red_niz"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    mousespeed                          1
    radius                              0.1
  }
  buf_right
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_bf_right"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    mousespeed                          1
    radius                              0.1
  }
  buf_left
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_bf_left"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    mousespeed                          1
    radius                              0.1
  }
  osv_cab_norm
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_svet_cab"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  holod
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_zapas02"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  perekl_stobogr
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_grev_zerkalo"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  otopl_cab
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_otopl_cab"
    limits                              0,1
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  ventilacia
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_vent_cab"
    limits                              0,1
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  radio
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_radio"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  zel_svet
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_zel_svet"
    limits                              0,1
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  otkl
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler2.im"
    att                                 "a.tumb_va"
    angles                              -0.5,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          -1
  }
  zapros
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopki/knopka1.im"
    att                                 "a.knopka_zapros"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  povtor
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopki/knopka1.im"
    att                                 "a.knopka_povtor"
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
  }
  stekloobogrev
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_grev_lobovogo"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  stekloobogrev_marchrut
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_grev_ukazatel"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  stekloobogrev_bok
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_grev_bokovogo"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  osv1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler2.im"
    att                                 "a.tumb_svet_salona"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  obogrev_cab_norm
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler2.im"
    att                                 "a.tumb_pogrev_cab_norm"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  obogrev_cab_itensiv
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler2.im"
    att                                 "a.tumb_pogrev_cab_intens"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  compressor_vspom
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler2.im"
    att                                 "a.tumb_dop_kompressor"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  tormozenie
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler2.im"
    att                                 "a.tumb_torm"
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         1,1
  }
  wipers_m
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_dvornik_m"
    angles                              0.5,-0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  wipers_p
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_dvornik_pom"
    angles                              0.5,-0.5
    notches                             0,1
    limits                              0,1
    notchheight                         1,1
    radius                              0.1
  }
  zvonok
  {
    kind                                "pullrope"
    auto-create                         1
    mesh                                "knopki/knopka1.im"
    att                                 "a.knopka_zvonok"
    limits                              0,1
    angles                              0,-0.003
    mousespeed                          10
    notches                             0,1
    notchheight                         0,0
  }
  dop_obogrev_cab
  {
    kind                                "lever"
    mesh                                "knopki/krutilka4.im"
    att                                 "a.grev_cab_dop"
    auto-create                         1
    limits                              0,1
    angles                              0,1.5
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0.1
    mousespeed                          5
  }
  obogrev_maslootd
  {
    kind                                "lever"
    mesh                                "knopki/krutilka3.im"
    att                                 "a.grev_maslo"
    auto-create                         1
    limits                              0,1
    angles                              0,1.5
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0.1
    mousespeed                          5
  }
  av_pit_alsn1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_pitanie"
    angles                              2,0.5
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_pit_alsn
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_alsn"
    angles                              2,0.5
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_pit_svet
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_svet"
    angles                              2,0.5
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_maslootd
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_pogrev_maslo"
    angles                              2,0.5
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_compressor_vspom
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_dop_kompress"
    angles                              2,0.5
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_pant
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_pant"
    angles                              2,0.5
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_pit_doors
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_doors"
    angles                              2,0.5
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_pit_lights
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_lights"
    angles                              2,0.5
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_pit_bf_dvornik
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_bf_dvornik"
    angles                              2,0.5
    notches                             0,1
    notchheight                         0,1
    radius                              0.1
    mousespeed                          1
  }
  av_stekloobogrev_lob
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_pogrev_lobovoe"
    angles                              2,0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  av_obogrev_marshrut
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_pogrev_marshrut"
    angles                              2,0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  av_stekloobogrev_bok
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_pogrev_bokovoe"
    angles                              2,0.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  perekl_ppt
  {
    kind                                "lever"
    mesh                                "knopki/krutilka5.im"
    att                                 "a.ppt"
    auto-create                         1
    limits                              0,1
    angles                              -0.7,0.7
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.05
    mousespeed                          -1
  }
  rb1
  {
    mesh                                "rb.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rb03"
    limits                              0,1
    angles                              0,-0.006
    mousespeed                          1
  }
  epk_key
  {
    kind                                "lever"
    mesh                                "knopki/krutilka_epk.im"
    att                                 "a.epk_key"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    angles                              0,1.57
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
  }
  pedal_m
  {
    mesh                                "pedal.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pesok01"
    limits                              0,1
    angles                              0,-0.3
    mousespeed                          10
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
  }
  pedal_mp
  {
    mesh                                "pedal.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pesok02"
    limits                              0,1
    angles                              0,-0.3
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
    radius                              0.01
  }
  vu
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_VU"
    angles                              -0.5,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  q54
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_Q54"
    angles                              0.5,-1
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
    mousespeed                          1
  }
  avt_upu
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "vkl.im"
    att                                 "a.pit_upu"
    angles                              0.5,-1
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.01
    mousespeed                          1
  }
  upu_on
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumb_met.im"
    att                                 "a.per_upu"
    angles                              -0.5,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    radius                              0.01
    mousespeed                          1
  }
  stopkran
  {
    kind                                "lever"
    mesh                                "stop-kran.im"
    att                                 "a.stop-kran"
    auto-create                         1
    mousespeed                          -1
    radius                              0.05
    limits                              0,1
    angles                              1.57,0
    notches                             0,1
    notchheight                         0,0
  }
  swivel_chair
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "kreslo.im"
    att                                 "a.kreslo"
    limits                              -1,1
    angles                              1.8,-1.3
    radius                              0.1
    mousespeed                          0.2
    att-parent                          "default"
  }
  swivel_chair1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "kreslo.im"
    att                                 "a.kreslo_pom"
    limits                              -1,1
    angles                              1.8,-1.3
    radius                              0.2
    mousespeed                          0.2
    att-parent                          "default"
  }
  chair1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "otkidnoe_sidenie.im"
    att                                 "a.otkidnoe_sidenie"
    angles                              0,-1.6
    notches                             0,1
    limits                              0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          -0.5
  }
  slidingwindowr
  {
    kind                                "animated-lever"
    mesh                                "wind_r.im"
    att                                 "a.okno01"
    use-parent-bounds                   1
    auto-create                         1
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          0.5
    limits                              0,1
  }
  slidingwindowl
  {
    kind                                "animated-lever"
    mesh                                "wind_l.im"
    att                                 "a.okno02"
    use-parent-bounds                   1
    auto-create                         1
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          0.5
    limits                              0,1
  }
  blind_r
  {
    kind                                "animated-lever"
    mesh                                "shtora.im"
    att                                 "a.shtora01"
    use-parent-bounds                   1
    auto-create                         1
    mousespeed                          -0.5
    limits                              0,1
    test-collisions                     0
  }
  blind_r-collision-box
  {
    kind                                "collision-proxy"
    mesh                                "shtora_vsp.im"
    collision-parent                    "blind_r"
    att-parent                          "blind_r"
    att                                 "a.selection"
    auto-create                         1
  }
  blind_l
  {
    kind                                "animated-lever"
    mesh                                "shtora.im"
    att                                 "a.shtora02"
    use-parent-bounds                   1
    auto-create                         1
    mousespeed                          -0.5
    limits                              0,1
    test-collisions                     0
  }
  blind_l-collision-box
  {
    kind                                "collision-proxy"
    mesh                                "shtora_vsp.im"
    collision-parent                    "blind_l"
    att-parent                          "blind_l"
    att                                 "a.selection"
    auto-create                         1
  }
  r_wiper
  {
    mesh                                "dvornik.im"
    auto-create                         1
    att                                 "a.m_wip"
    anim                                "anim_dvornik.kin"
  }
  l_wiper
  {
    mesh                                "dvornik.im"
    auto-create                         1
    att                                 "a.pom_wip"
    anim                                "anim_dvornik.kin"
  }
  clear_w
  {
    mesh                                "w_clear.im"
    auto-create                         1
    att                                 "a.cab"
    att-parent                          "default"
  }
  krishka
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "krishka.im"
    att                                 "a.krishka"
    angles                              0,-2
    notches                             1,0
    notchheight                         1,1
    radius                              0.1
    mousespeed                          -1
  }
  kran_epk_s
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "kran_nm.im"
    att                                 "a.kran_epk-sin"
    angles                              0,-1.5
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          -1
  }
  kran_epk_r
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "kran_tm.im"
    att                                 "a.kran_epk-red"
    angles                              -1.7,0
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          -1
  }
  nm
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "kran_nm1.im"
    att                                 "a.kran_nm"
    angles                              -1.7,0
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  tm
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "kran_tm.im"
    att                                 "a.kran_tm"
    angles                              -1.7,0
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
    mousespeed                          1
  }
  krishka_pult
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "krishka_pult.im"
    att                                 "a.krishka_pulta"
    angles                              0,0.85
    notches                             0,1
    notchheight                         1,1
    radius                              0.1
  }
  pult
  {
    mesh                                "pult.im"
    auto-create                         1
    att                                 "a.cab"
  }
  switch202
  {
    mesh                                "intersiti_klava/is_enter.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.klava_is"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
    radius                              0.01
  }
  switch20
  {
    mesh                                "bk_klava/bk_e.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.klava_bk_m"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.01
  }
  bk_f
  {
    mesh                                "bk_klava/bk_f.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.klava_bk_m"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.01
  }
  nw
  {
    mesh                                "bk_klava/bk_d.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.klava_bk_m"
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.01
  }
  knopka_r1
  {
    mesh                                "knopki/knp_rad.im"
    att                                 "a.knopka_r1"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.001
    notches                             0,1
    notchheight                         0,0
  }
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
kuid                                    <kuid2:833171:101298:1>
kuid-table
{
}
Файлы:

`bk_klava`
`bk_klava / pult.texture.txt`	`30 B`
`bk_klava / bk_d.im`	`676 B`
`bk_klava / bk_f.im`	`676 B`
`bk_klava / bk_e.im`	`676 B`
`bil_mode_p.im`	`580 B`
`bil_mode_m.im`	`580 B`
`bil_track_st.im`	`580 B`
`bil_track_dv.im`	`580 B`
`intersiti_klava`
`intersiti_klava / detali.texture.txt`	`32 B`
`intersiti_klava / is_enter.im`	`676 B`
`knopki`
`knopki / 0.im`	`676 B`
`knopki / 1.im`	`676 B`
`knopki / 2.im`	`676 B`
`knopki / 3.im`	`676 B`
`knopki / 4.im`	`676 B`
`knopki / 5.im`	`676 B`
`knopki / 6.im`	`676 B`
`knopki / 7.im`	`676 B`
`knopki / 8.im`	`676 B`
`knopki / 9.im`	`676 B`
`knopki / bil_f.im`	`676 B`
`knopki / bil_rmp.im`	`676 B`
`knopki / bil_vk.im`	`676 B`
`knopki / cab-03x.texture.txt`	`33 B`
`knopki / detali.texture.txt`	`32 B`
`knopki / detali2.texture.txt`	`33 B`
`knopki / down.im`	`1.1 kB`
`knopki / i.im`	`676 B`
`knopki / k.im`	`676 B`
`knopki / k20.im`	`676 B`
`knopki / knopka1.im`	`7.1 kB`
`knopki / knopka_black.im`	`3.8 kB`
`knopki / knopka_red.im`	`3.8 kB`
`knopki / krutilka1.im`	`6.0 kB`
`knopki / knopka_podsvetki.im`	`4.8 kB`
`knopki / krutilka2.im`	`6.0 kB`
`knopki / knp_rad.im`	`724 B`
`knopki / krutilka3.im`	`13.3 kB`
`knopki / krutilka5.im`	`5.9 kB`
`knopki / krutilka4.im`	`13.3 kB`
`knopki / krutilka6.im`	`7.3 kB`
`knopki / krutilka_f.im`	`6.6 kB`
`knopki / l.im`	`676 B`
`knopki / krutilka_epk.im`	`8.6 kB`
`knopki / oc.im`	`676 B`
`knopki / o.im`	`1.1 kB`
`knopki / otpr.im`	`676 B`
`knopki / minus.im`	`1.1 kB`
`knopki / plus.im`	`1.1 kB`
`knopki / podt.im`	`676 B`
`knopki / p.im`	`676 B`
`knopki / pult.texture.txt`	`30 B`
`knopki / up.im`	`1.1 kB`
`m_upu`
`m_upu / lamps.texture.txt`	`28 B`
`m_upu / upu_ekran.texture.txt`	`32 B`
`m_upu / upu_ekran.jpg`	`1.4 MB`
`m_upu / lamps.tga`	`512.0 kB`
`cab-03x.texture.txt`	`30 B`
`omyv_klava`
`omyv_klava / knopka_omyv.im`	`676 B`
`omyv_klava / knopka_wip_pom.im`	`676 B`
`omyv_klava / knopka_wip_m.im`	`676 B`
`omyv_klava / pult.texture.txt`	`30 B`
`cifira-cifira.texture.txt`	`47 B`
`detali-detali.texture.txt`	`29 B`
`detali.texture.txt`	`29 B`
`cifira.jpg`	`153.5 kB`
`detali2.texture.txt`	`30 B`
`anim_dvornik.kin`	`32.9 kB`
`dvornik.im`	`20.9 kB`
`detali.jpg`	`703.2 kB`
`klub_tex-klub_tex.texture.txt`	`51 B`
`klub_tex.texture.txt`	`31 B`
`detali2.jpg`	`697.2 kB`
`cab-03x.jpg`	`738.9 kB`
`kr_wr.im`	`580 B`
`klub_tex.jpg`	`315.3 kB`
`kran_nm1.im`	`3.3 kB`
`kran_tm.im`	`3.3 kB`
`kran_nm.im`	`8.6 kB`
`kontroller.im`	`51.2 kB`
`kw_ed.im`	`1.6 kB`
`krishka.im`	`12.8 kB`
`krishka_pult.im`	`9.4 kB`
`kreslo.im`	`150.8 kB`
`needle_black.im`	`16.0 kB`
`needle_red.im`	`16.0 kB`
`ocl-ocl.texture.txt`	`41 B`
`ocr-ocr.texture.txt`	`41 B`
`okbm.texture.txt`	`47 B`
`okf1.texture.txt`	`49 B`
`ocl.jpg`	`241.0 kB`
`okff.texture.txt`	`47 B`
`cab_03x.im`	`1.5 MB`
`okna-a.jpg`	`117.1 kB`
`ocr.jpg`	`242.6 kB`
`okna-f.jpg`	`784.2 kB`
`okna-okna-a.texture.txt`	`45 B`
`okna-f1.jpg`	`700.4 kB`
`okna-okna.texture.txt`	`47 B`
`okna-m.jpg`	`797.7 kB`
`okna.jpg`	`402.2 kB`
`okna.texture.txt`	`27 B`
`otkidnoe_sidenie.im`	`10.0 kB`
`pedal.im`	`9.5 kB`
`per_plast.im`	`5.8 kB`
`pult.texture.txt`	`27 B`
`pult.im`	`596.8 kB`
`pult_obshivka.texture.txt`	`36 B`
`rb.im`	`22.7 kB`
`rev_back.im`	`516 B`
`rev_fwd.im`	`516 B`
`reversor.im`	`14.9 kB`
`ruchnik.im`	`42.4 kB`
`rukoyatka-395.im`	`32.9 kB`
`shtora.im`	`14.8 kB`
`stop-kran.im`	`6.2 kB`
`shtora_vsp.im`	`8.0 kB`
`pult_obshivka.jpg`	`403.1 kB`
`tex9.texture.txt`	`27 B`
`thumbnail.jpg`	`22.5 kB`
`pult.jpg`	`755.7 kB`
`tumbler2.im`	`2.6 kB`
`tumb_met.im`	`30.1 kB`
`vet-vet.texture.txt`	`41 B`
`vkl.im`	`2.0 kB`
`tumbler.im`	`7.7 kB`
`w_och_right.im`	`1.9 kB`
`w_clear.im`	`3.5 kB`
`w_wet.im`	`3.5 kB`
`klub_tex.bmp`	`768.1 kB`
`wel-wel.texture.txt`	`41 B`
`wer-wer.texture.txt`	`41 B`
`wind_l.im`	`30.1 kB`
`wind_r.im`	`30.1 kB`
`wet.jpg`	`249.1 kB`
`warning.tga`	`256.0 kB`
`tex9.jpg`	`756.0 kB`
`cifira.bmp`	`768.1 kB`
`klub_tex2.bmp`	`768.1 kB`
Общий объём файлов:	15.0 MB
Версии элемента:
Куид	Тип	Имя	Билд	Дата	Размер
<kuid2:833171:101298:1>	interior	Interior ED4M	3.7	3.11.2024 16:28:59	10.9 MB
Зависимости:
Куид	Автор	Тип	Имя	Билд	Дата	Размер
Нет
Зависимые элементы:
Куид	Автор	Тип	Имя	Билд	Дата	Размер
<kuid2:833171:101303:7>	Ilyon	traincar	[бот] ЭД4М-0400 Г	4.6	13.11.2024 14:46:58	9.8 MB
<kuid2:833171:101312:6>	Ilyon	traincar	[бот] ЭД4М-0038 Г	4.6	13.11.2024 14:46:57	10.0 MB
<kuid2:833171:101313:7>	Ilyon	traincar	[бот] ЭД4М-0271 Г	4.6	13.11.2024 14:46:59	9.8 MB
<kuid2:833171:101317:6>	Ilyon	traincar	[бот] ЭД4М-0086 Г	4.6	13.11.2024 14:46:57	9.8 MB
Входит в пакеты:
ЭД4м
Пак деталей для бото-локомотивов