TE3/7 interior [bot]

<kuid:833171:100875>

Тип: Кабина
Загружено: 4.11.2024 12:52:10
Размер: 8.8 MB
Автор: Ilyon
Загрузил: Ilyon
Опубликовано: 4.11.2024 12:52:10
Скачиваний: 23

Скачать

Миниатюра:

Конфигурация:

kind                                    "interior"
trainz-build                            3.7
category-class                          "ZI"
category-region                         "RU"
cameradefault                           5
category-era                            "1970s;1980s;1990s;2000s"
username                                "TE3/7 interior [bot]"
author                                  "vold12"
interior-controls-type                  "full"
cameralist
{
  camera0                               -1.132,0.668,0.299,0.01,-0.304
  camera1                               -0.492,0.918,0.567,-0.003,-0.289
  camera2                               0.48,0.556,0.424,11.674,-0.128
  camera3                               -0.38,0.91,0.587,-0.84,-0.762
  camera4                               -0.164,0.431,0.538,9.354,-0.035
  camera5                               0.463,0.123,0.422,0.118,0
}
mesh-table
{
  default
  {
    mesh                                "te3_cabin.im"
    auto-create                         1
  }
  stekla-suhie
  {
    mesh                                "lob_sklo.im"
    att                                 "a.stekla-lob"
    kind                                "light"
    auto-create                         1
  }
  maslo1
  {
    mesh                                "black_needle_med_pressure.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.maslo1"
    limits                              0,16
    angles                              0,4.71
    att-parent                          "default"
    value                               0
  }
  maslo2
  {
    mesh                                "white_needle_pressure_s.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.maslo2"
    limits                              0,6
    angles                              0,2.2
    att-parent                          "default"
    value                               -2
  }
  temp_v1
  {
    auto-create                         1
    mesh                                "white_needle.im"
    att                                 "a.temperatura_vody1"
    att-parent                          "default"
  }
  temp_v2
  {
    auto-create                         1
    mesh                                "white_needle.im"
    att                                 "a.temperatura_vody2"
    att-parent                          "default"
  }
  temp_m1
  {
    auto-create                         1
    mesh                                "white_needle.im"
    att                                 "a.temperatura_masla1"
    att-parent                          "default"
    limits                              0,6
  }
  toplivo
  {
    auto-create                         1
    mesh                                "black_needle_sm_pressure.im"
    att                                 "a.toplivo"
    att-parent                          "default"
    limits                              0,6
    angles                              0,1.5
    value                               2
  }
  vozduh_cont
  {
    auto-create                         1
    mesh                                "white_needle_pressure_s.im"
    att                                 "a.vozduh_kontact"
    att-parent                          "default"
  }
  tok_zaryada_ab
  {
    mesh                                "amperneedle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tok_zarayda_ab"
    limits                              0,150
    angles                              0,1.6
    att-parent                          "default"
    value                               -2
  }
  napruga_generatora
  {
    mesh                                "amperneedle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.napr_gen"
    limits                              0,1000
    angles                              0,1.6
    att-parent                          "default"
    value                               -2
  }
  nagruzka_generatora
  {
    mesh                                "amperneedle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.nagr_gen"
    limits                              0,5000
    angles                              0,1.6
    att-parent                          "default"
    value                               0
  }
  wiper_left
  {
    auto-create                         1
    mesh                                "l_dvor.im"
    att                                 "a.dvpom"
    att-parent                          "default"
  }
  wiper_right
  {
    auto-create                         1
    mesh                                "l_dvor.im"
    att                                 "a.dvpom01"
    att-parent                          "default"
  }
  sl2m
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "speedo_needle.im"
    att                                 "a.speedo_needle"
    limits                              0,41.700001
    angles                              0,4.1
    att-parent                          "default"
    test-collisions                     0
  }
  clock_hr
  {
    mesh                                "strelka_chasovaya.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.chasy"
    limits                              0,24
    angles                              0,6.283
    att-parent                          "default"
  }
  clock_min
  {
    mesh                                "strelka_minutnaya.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.chasy"
    limits                              0,60
    angles                              0,6.283
    att-parent                          "default"
  }
  s_r
  {
    mesh                                "te3_sun.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.s_r"
    limits                              0,0
    angles                              0,0
    value                               1
  }
  s_l
  {
    mesh                                "te3_sun.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.s_l"
    limits                              0,0
    angles                              0,0
    value                               1
  }
  fr_mash
  {
    mesh                                "te3_fort_rama_r.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.for-mash"
    limits                              0,1
    angles                              0,-0.014
    value                               1
    mousespeed                          -1
  }
  fr_pom
  {
    mesh                                "te3_fort_rama_l.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.for-pom"
    limits                              0,1
    angles                              0,-0.014
    value                               1
    mousespeed                          -1
  }
  mthrottle_lever
  {
    kind                                "lever"
    mesh                                "te3_throttle_lever.im"
    att                                 "a.throttle"
    limits                              0,1
    angles                              0,1.8
    notches                             0,0.062,0.125,0.187,0.25,0.312,0.375,0.438,0.5,0.56,0.625,0.687,0.75,0.813,0.875,0.938,1
    notchheight                         0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    radius                              0.25
    mousespeed                          -0.3
    auto-create                         1
  }
  mreverser_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "reverser_handle.im"
    att                                 "a.reverser_lever"
    limits                              0,2
    angles                              -0.55,0.55
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.05
    att-parent                          "default"
  }
  trainbrake_lever2
  {
    mesh                                "394_ruch.im"
    att                                 "a.trainbrake"
    auto-create                         1
    kind                                "lever"
    limits                              0,100
    angles                              0,-2.104
    notches                             0,0.3,0.45,0.5,0.6,0.7,1
    notchheight                         0,0,0,0,0,0,0
    radius                              0.13
    att-parent                          "default"
    mousespeed                          0.35
  }
  independantbrake_lever2
  {
    mesh                                "254_ruch.IM"
    att                                 "a.locobrake_handle"
    auto-create                         1
    kind                                "lever"
    angles                              0,-3.14
    limits                              0,1
    notches                             0.02,0.255,0.51,0.765,1
    notchheight                         0,0,0,0,0,0,0,0
    radius                              0.15
    test-collisions                     1
    mousespeed                          -0.55
  }
  sr
  {
    mesh                                "te3_seduha.im"
    kind                                "lever"
    att                                 "a.sr"
    angles                              0,1.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          -1
  }
  bloc
  {
    mesh                                "te3_kran1.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.brake_block_lever"
    angles                              -3.15,0
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    test-collisions                     1
    mousespeed                          -1
  }
  bploco_equaliser
  {
    mesh                                "flowneedle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bploco_equaliser"
    limits                              0,1000
  }
  bptrainbrakecylinder_needle
  {
    mesh                                "black_needle_sm_pressure.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.brakecyl"
    limits                              0,1750
  }
  bptrainbrakepipe_needle
  {
    mesh                                "brakeneedle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bplocomain_need2"
    limits                              0,1600
  }
  bplocomain_needle
  {
    mesh                                "brakeneedlered.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bplocomain_needle"
    limits                              0,1600
  }
  epk
  {
    mesh                                "te3_epk_key.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.epv"
    angles                              -1.57,-0.12
    notches                             0,1
    notchheight                         1,1
    radius                              0.035
    test-collisions                     1
  }
  pr_yarko
  {
    mesh                                "te3_pull_01.IM"
    kind                                "animated-lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pr_yarko"
    limits                              0,1
    angles                              0,0.02
    notches                             0,1
    notchheight                         0,0
    mousespeed                          100
    radius                              0.003
  }
  pr_tusklo
  {
    mesh                                "te3_pull_02.IM"
    kind                                "animated-lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pr_tusklo"
    limits                              0,1
    angles                              0,0.02
    notches                             0,1
    notchheight                         0,0
    mousespeed                          100
    radius                              0.003
  }
  bdit
  {
    mesh                                "zaglushka.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.bdit"
    limits                              0,1
    angles                              0.523,-0.523
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.003
  }
  ratsia-t
  {
    mesh                                "te3_tumb1.IM"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.dvig"
    limits                              0,1
    angles                              0,1.2
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          50
  }
  upravlenie_holodilnikom
  {
    mesh                                "te3_tumb1.IM"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.avt-hol"
    limits                              0,1
    angles                              0,1.2
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          50
  }
  vent_voda
  {
    mesh                                "te3_tumb1.IM"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.vent-voda"
    limits                              0,1
    angles                              0,1.2
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          50
  }
  vent_maslo
  {
    mesh                                "te3_tumb1.IM"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.vent-maslo"
    limits                              0,1
    angles                              0,1.2
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          50
  }
  osv_oth
  {
    mesh                                "te3_pull_02.IM"
    kind                                "animated-lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.osv_oth"
    limits                              0,1
    angles                              0,0.02
    notches                             0,1
    notchheight                         0,0
    mousespeed                          100
    radius                              0.003
  }
  osv_pult
  {
    mesh                                "zaglushka.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.osv_oth"
    mousespeed                          0.4
    angles                              3.14,0
    limits                              0,1
  }
  top_nas2
  {
    mesh                                "te3_pull_01.IM"
    kind                                "animated-lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.top_nas2"
    limits                              0,1
    angles                              0,0.02
    notches                             0,1
    notchheight                         0,0
    mousespeed                          100
    radius                              0.003
  }
  top_nas1
  {
    mesh                                "te3_pull_01.IM"
    kind                                "animated-lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.top_nas1"
    limits                              0,1
    angles                              0,0.02
    notches                             0,1
    notchheight                         0,0
    mousespeed                          100
    radius                              0.003
  }
  avt_pes
  {
    mesh                                "te3_tumb1.IM"
    kind                                "lever"
    att                                 "a.avt_pes"
    limits                              0,1
    angles                              0,1.2
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          100
  }
  gp
  {
    mesh                                "te3_tumb1.IM"
    kind                                "lever"
    att                                 "a.gp"
    limits                              0,1
    angles                              0,1.2
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          100
  }
  gv
  {
    mesh                                "te3_tumb1.IM"
    kind                                "lever"
    att                                 "a.gv"
    limits                              0,1
    angles                              0,1.2
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          100
  }
  tumb1
  {
    mesh                                "te3_pull_02.IM"
    kind                                "animated-lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tumb1"
    limits                              0,1
    angles                              0,0.02
    notches                             0,1
    notchheight                         0,0
    mousespeed                          100
    radius                              0.003
  }
  paketnik11
  {
    mesh                                "te3_pull_02.IM"
    kind                                "animated-lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.paketnik11"
    limits                              0,1
    angles                              0,0.02
    notches                             0,1
    notchheight                         0,0
    mousespeed                          100
    radius                              0.003
  }
  paketnik06
  {
    mesh                                "te3_galetnik.im"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.ratsia-t"
    limits                              0,1
    angles                              0,1.2
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          100
  }
  alsn-filtr
  {
    mesh                                "te3_galetnik.IM"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.alsn-filtr"
    limits                              0,1
    angles                              0,1.2
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          100
  }
  switch_t_prok_masl
  {
    kind                                "lever"
    mesh                                "te3_tumb2.im"
    att                                 "a.switch_t_Prok_masl"
    limits                              0,1
    angles                              0,1.2
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          100
  }
  light_kab
  {
    mesh                                "zaglushka.im"
    kind                                "lever"
    att                                 "a.osv-kab-tumb"
    limits                              0,1
    angles                              0,1.2
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          -100
  }
  obogrev-kab
  {
    mesh                                "te3_pull_01.IM"
    kind                                "animated-lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.obogrev-kab"
    limits                              0,1
    angles                              0,0.02
    notches                             0,1
    notchheight                         0,0
    mousespeed                          100
    radius                              0.003
  }
  dvig
  {
    mesh                                "te3_pull_01.IM"
    kind                                "animated-lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.paketnik10"
    limits                              0,1
    angles                              0,0.02
    notches                             0,1
    notchheight                         0,0
    mousespeed                          100
    radius                              0.003
  }
  ovk
  {
    mesh                                "te3_tumb2.IM"
    kind                                "lever"
    att                                 "a.tumb2"
    limits                              0,1
    angles                              0,1.2
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          100
  }
  osvmsrcsh
  {
    mesh                                "te3_tumb2.IM"
    kind                                "lever"
    att                                 "a.switch_t_Osv_Marsh"
    limits                              0,1
    angles                              0,1.2
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          100
  }
  osvpodkuz
  {
    mesh                                "te3_tumb2.IM"
    kind                                "lever"
    att                                 "a.switch_t_Osv_podk"
    limits                              0,1
    angles                              0,1.2
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          100
  }
  osvmash
  {
    mesh                                "te3_tumb2.IM"
    kind                                "lever"
    att                                 "a.switch_t_Osv_Mash"
    limits                              0,1
    angles                              0,1.2
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          100
  }
  osv_kab
  {
    mesh                                "te3_tumb2.IM"
    kind                                "lever"
    att                                 "a.osv_kab"
    limits                              0,1
    angles                              0,1.2
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          -100
  }
  buf_p_lev
  {
    mesh                                "te3_tumb2.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.per-lev-kras"
    angles                              0.6,-0.6
    limits                              0,2
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.035
    mousespeed                          -3
  }
  buf_p_pr
  {
    mesh                                "te3_tumb2.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.per-prav-kras"
    angles                              0.6,-0.6
    limits                              0,2
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.035
    mousespeed                          -3
  }
  buf_z_lev
  {
    mesh                                "te3_tumb2.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.zad-lev-kras"
    angles                              0.6,-0.6
    limits                              0,2
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.035
    mousespeed                          -3
  }
  buf_z_pr
  {
    mesh                                "te3_tumb2.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.zad-prav-kras"
    angles                              0.6,-0.6
    limits                              0,2
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.035
    mousespeed                          -3
  }
  paketnik02
  {
    mesh                                "te3_pull_02.IM"
    kind                                "animated-lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.paketnik02"
    limits                              0,1
    angles                              0,0.02
    notches                             0,1
    notchheight                         0,0
    mousespeed                          100
    radius                              0.003
  }
  paketnik03
  {
    mesh                                "te3_tumb1.IM"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.paketnik03"
    limits                              0,1
    angles                              0,1.2
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          100
  }
  tumb_fan_l
  {
    mesh                                "te3_tumb1.IM"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.switch_tumb_fan_l"
    limits                              0,1
    angles                              0,1.2
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          100
  }
  paketnik07
  {
    mesh                                "zaglushka.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.paketnik07"
    limits                              0,1
    angles                              0.323,-0.673
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.003
  }
  pedal
  {
    mesh                                "pull_black.im"
    kind                                "pullrope"
    att                                 "a.pesok"
    att-parent                          "default"
    auto-create                         1
    limits                              0,1
    angles                              0,-0.0075
    value                               1
    mousespeed                          100
  }
  knopka-r
  {
    mesh                                "pull_red.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.knopka-r"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  avar-ost
  {
    mesh                                "te3_pull_02.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avar-ost"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          100
  }
  zap2
  {
    mesh                                "te3_pull_03.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.zap2"
    limits                              0,1
    angles                              0,-0.006
    mousespeed                          15
  }
  zap1
  {
    mesh                                "te3_pull_03.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.zap1"
    limits                              0,1
    angles                              0,-0.006
    mousespeed                          15
  }
  rb-stol
  {
    mesh                                "rb-knopka_st.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rb-stol"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  rb
  {
    mesh                                "rb-knopka.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rb"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  manevr
  {
    mesh                                "zaglushka.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.manevr"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  horn
  {
    mesh                                "te3_svistok_P.im"
    kind                                "pulllever"
    auto-create                         1
    att                                 "a.tif-mash"
    angles                              0,-0.18
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    mousespeed                          -4
  }
  svist-mash
  {
    mesh                                "te3_tifon_M.im"
    kind                                "pulllever"
    auto-create                         1
    att                                 "a.svist"
    angles                              0,-0.18
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    mousespeed                          -4
  }
  tif-pom
  {
    mesh                                "te3_tifon_P.im"
    kind                                "pulllever"
    auto-create                         1
    att                                 "a.tif-pom"
    angles                              0,-0.18
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    mousespeed                          -4
  }
  svist-pom
  {
    mesh                                "te3_svistok_P.im"
    kind                                "pulllever"
    auto-create                         1
    att                                 "a.svist1"
    angles                              0,-0.18
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    mousespeed                          -4
  }
  wiper_left_lever
  {
    mesh                                "pov-sin.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.dvor-l"
    mousespeed                          1
    angles                              0,31.450001
    limits                              0,1
  }
  wiper_right_lever
  {
    mesh                                "pov-sin.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.dvor-r"
    mousespeed                          1
    angles                              0,31.450001
    limits                              0,1
  }
  kran2
  {
    mesh                                "te3_kran1.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.kran2"
    angles                              0,1.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    test-collisions                     1
    mousespeed                          -1
  }
  kran3
  {
    mesh                                "te3_kran2.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.kran3"
    angles                              0,1.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    test-collisions                     1
    mousespeed                          -1
  }
  kran4
  {
    mesh                                "te3_kran2.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.kran4"
    angles                              0,1.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    test-collisions                     1
    mousespeed                          -1
  }
  kran5
  {
    mesh                                "te3_kran2.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.kran5"
    angles                              0,-1.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    test-collisions                     1
    mousespeed                          -1
  }
  kran6
  {
    mesh                                "te3_kran2.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.kran6"
    angles                              0,-1.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    test-collisions                     1
    mousespeed                          -1
  }
  dverka_vk
  {
    mesh                                "te3_vk.im"
    att                                 "a.skaf_VK"
    att-parent                          "default"
    kind                                "lever"
    angles                              -1.4,0
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    auto-create                         1
    mousespeed                          -1
  }
  podlok_r
  {
    mesh                                "te3_podlokotnik.im"
    att-parent                          "default"
    att                                 "a.podlok_r"
    angles                              0,0
    limits                              0,0
    notches                             0,1
    notchheight                         0,0
    kind                                "lever"
    auto-create                         1
  }
  podlok_l
  {
    mesh                                "te3_podlokotnik.im"
    att-parent                          "default"
    att                                 "a.podlok_l"
    angles                              0,0
    limits                              0,0
    notches                             0,1
    notchheight                         0,0
    kind                                "lever"
    auto-create                         1
  }
  shnurok_anim_racia
  {
    auto-create                         1
    mesh                                "shnurok_anim.im"
    att                                 "a.shnurtel"
    att-parent                          "default"
  }
  fan_r
  {
    auto-create                         1
    mesh                                "fan.im"
    att                                 "a.fan_r"
    att-parent                          "default"
  }
  fan_l
  {
    auto-create                         1
    mesh                                "fan.im"
    att                                 "a.fan_l"
    att-parent                          "default"
  }
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
kuid                                    <kuid:833171:100875>
kuid-table
{
}

Файлы:

`254_day-254_day.texture.txt`	`30 B`
`394_day.texture.txt`	`30 B`
`anim-arrow-temp.im`	`810 B`
`b-sl2m-2-l.texture.txt`	`33 B`
`b-melkota.tga`	`3.0 kB`
`b-sl2m_detali-2.texture.txt`	`38 B`
`b-sl2m-2-l.tga`	`3.0 kB`
`b-sl2m_detali-2.tga`	`3.0 kB`
`black_needle_sm_pressure.im`	`4.7 kB`
`black_needle_med_pressure.im`	`4.7 kB`
`brakeneedle.im`	`6.2 kB`
`casual02_m_25.texture.txt`	`36 B`
`brakeneedlered.im`	`6.2 kB`
`394_ruch.im`	`19.5 kB`
`epk_day-epk_day.texture.txt`	`30 B`
`anti_sun.im`	`26.2 kB`
`254_ruch.im`	`23.3 kB`
`fan.im`	`12.8 kB`
`fan_day1.texture.txt`	`31 B`
`flowneedle.im`	`6.2 kB`
`galetnik_day-galetnik_day.texture.txt`	`37 B`
`gudok_day-gudok_day.texture.txt`	`34 B`
`fan_day1.jpg`	`72.1 kB`
`horn.im`	`13.0 kB`
`amperneedle.im`	`2.5 kB`
`kran1_night-kran1_night.texture.txt`	`34 B`
`b-melkota.texture.txt`	`32 B`
`254_day.jpg`	`90.6 kB`
`kran2_day-kran2_day.texture.txt`	`34 B`
`394_day.jpg`	`87.9 kB`
`man_sm_needle.im`	`1.7 kB`
`casual02_m_25.jpg`	`205.7 kB`
`mat8_night_spedomeetr.texture.txt`	`44 B`
`galetnik_day.tga`	`48.0 kB`
`mat_1_day.texture.txt`	`32 B`
`mat_2_day-mat_2_day.texture.txt`	`32 B`
`l_dvor.im`	`19.2 kB`
`lob_sklo.im`	`10.9 kB`
`mat_2_light-mat_2_light.texture.txt`	`57 B`
`mat_2_day.jpg`	`224.3 kB`
`mat_2_night-mat_2_night.texture.txt`	`34 B`
`mat_2_night.jpg`	`132.1 kB`
`mat_3_day-mat_3_alpha.texture.txt`	`53 B`
`epk_day.tga`	`192.0 kB`
`mat8_night_spedomeetr.tga`	`128.0 kB`
`mat_4_day-mat_4_day.texture.txt`	`34 B`
`kran2_day.tga`	`192.0 kB`
`mat_5_day.texture.txt`	`32 B`
`kran1_day.tga`	`192.0 kB`
`mat_6_day-mat_6_day.texture.txt`	`32 B`
`kran1_night.tga`	`192.0 kB`
`mat_7_day-mat_7_day.texture.txt`	`34 B`
`needle_black.jpg`	`12.4 kB`
`needle_black.texture.txt`	`35 B`
`needle_red.jpg`	`18.3 kB`
`needle_red.texture.txt`	`33 B`
`needle_speed.jpg`	`22.2 kB`
`needle_speed.texture.txt`	`35 B`
`gudok_day.tga`	`192.0 kB`
`podlokotnik.texture.txt`	`34 B`
`mat_1_day.jpg`	`1.0 MB`
`pov-sin.im`	`2.5 kB`
`pull1_day-pull1_day.texture.txt`	`34 B`
`mat_4_day.jpg`	`925.9 kB`
`pull2_day-pull2_day.texture.txt`	`34 B`
`mat_6_day.jpg`	`235.5 kB`
`pull3_day-pull3_day.texture.txt`	`34 B`
`pull_black.im`	`1.2 kB`
`pull_black.texture.txt`	`33 B`
`pull_black.tga`	`3.0 kB`
`pull_red.im`	`1.2 kB`
`pull_red.texture.txt`	`31 B`
`pull_red.tga`	`3.0 kB`
`rab_diz2sek.texture.txt`	`34 B`
`pull2_day.tga`	`48.0 kB`
`rb-knopka.im`	`2.5 kB`
`rb-knopka_st.im`	`2.6 kB`
`rb_1_day-rb_1_day.texture.txt`	`33 B`
`rb_2_day-rb_2_day.texture.txt`	`33 B`
`pull3_day.tga`	`48.0 kB`
`rb_2_day.texture.txt`	`31 B`
`rb_1_day.tga`	`48.0 kB`
`refl.texture.txt`	`27 B`
`reverser_handle.im`	`29.2 kB`
`reversor_day-reversor_day.texture.txt`	`37 B`
`podlokotnik.tga`	`192.0 kB`
`seduha-seduha.texture.txt`	`29 B`
`refl.bmp`	`192.1 kB`
`mat_7_day.tga`	`192.0 kB`
`shnur_anim_day-shnur_anim_day.texture.txt`	`39 B`
`shnurok_anim.im`	`13.8 kB`
`sklo_dirt-sklo_dirt_alpha.texture.txt`	`59 B`
`mat_5_day.jpg`	`975.6 kB`
`sklo_dirt.texture.txt`	`32 B`
`reversor_day.tga`	`96.0 kB`
`shnur_anim_day.tga`	`96.0 kB`
`rab_diz2sek.tga`	`192.0 kB`
`sn1sek.texture.txt`	`29 B`
`sl2m-val.im`	`16.2 kB`
`sn2sek.texture.txt`	`29 B`
`speedo_needle.im`	`10.5 kB`
`strelka_chasovaya.im`	`932 B`
`strelka_minutnaya.im`	`2.1 kB`
`rb_2_day.tga`	`192.0 kB`
`sun_day.texture.txt`	`30 B`
`pull1_day.tga`	`192.0 kB`
`svistok_day-svistok_day.texture.txt`	`36 B`
`mat_3_day.tga`	`1.0 MB`
`te3_epk_key.im`	`5.8 kB`
`te3_fan.im`	`12.1 kB`
`te3_fort_rama_l.im`	`14.2 kB`
`te3_fort_rama_r.im`	`14.2 kB`
`sun_day.jpg`	`185.4 kB`
`seduha.tga`	`384.0 kB`
`te3_fortochka.texture.txt`	`36 B`
`te3_galetnik.im`	`4.2 kB`
`te3_kran1.im`	`5.5 kB`
`te3_kran2.im`	`7.2 kB`
`te3_podlokotnik.im`	`3.6 kB`
`te3_locobrake_handle.im`	`23.4 kB`
`te3_pull_01.im`	`7.9 kB`
`te3_pull_03.im`	`2.4 kB`
`te3_pull_02.im`	`7.9 kB`
`te3_rb1.im`	`2.6 kB`
`te3_rb2.im`	`2.6 kB`
`te3_seduha.im`	`1.4 kB`
`te3_reverser_handle.im`	`29.3 kB`
`sn2sek.tga`	`192.0 kB`
`te3_svistok_m.im`	`13.1 kB`
`te3_svistok_p.im`	`13.1 kB`
`te3_sun.im`	`26.2 kB`
`te3_fortochka.jpg`	`222.2 kB`
`te3_throttle_day.texture.txt`	`39 B`
`sn1sek.tga`	`192.0 kB`
`te3_tifon_m.im`	`10.1 kB`
`te3_throttle_lever.im`	`11.8 kB`
`te3_tifon_p.im`	`10.1 kB`
`te3_shnurok.im`	`12.8 kB`
`te3_tumb1.im`	`5.5 kB`
`te3_tumb2.im`	`5.5 kB`
`tumbler1_day-tumbler1_day.texture.txt`	`37 B`
`te3_vk.im`	`21.3 kB`
`tumbler_day-tumbler_day.texture.txt`	`36 B`
`thumbnail.jpg`	`22.3 kB`
`tumbler_day.texture.txt`	`34 B`
`vcamera_day-vcamera_day.texture.txt`	`34 B`
`white_needle.im`	`1.8 kB`
`white_needle_pressure.im`	`1.6 kB`
`white_needle_pressure_s.im`	`1.6 kB`
`zaglushka.im`	`436 B`
`tumbler1_day.tga`	`48.0 kB`
`te3_throttle_day.jpg`	`133.9 kB`
`tumbler_day.tga`	`48.0 kB`
`vcamera_day.tga`	`384.0 kB`
`svistok_day.tga`	`192.0 kB`
`te3_cabin.im`	`1.8 MB`
`sklo_dirt.tga`	`768.0 kB`
`sklo_dirt_alpha.bmp`	`257.1 kB`
`mat_2_light.tga`	`1.0 MB`
Общий объём файлов:	13.8 MB

Версии элемента:

Куид	Тип	Имя	Билд	Дата	Размер
<kuid:833171:100875>	interior	TE3/7 interior [bot]	3.7	4.11.2024 12:52:10	8.8 MB

Зависимости:

Куид	Автор	Тип	Имя	Билд	Дата	Размер
Нет

Зависимые элементы:

Куид	Автор	Тип	Имя	Билд	Дата	Размер
<kuid2:833171:100874:3>	Ilyon	traincar	[bot] TE7-096	4.6	4.11.2024 12:51:39	7.3 MB
<kuid2:833171:100874:4>	Ilyon	traincar	[бот] ТЭ7-096	4.6	13.11.2024 16:51:17	7.3 MB
<kuid2:833171:100882:4>	Ilyon	traincar	[бот] ТЭ3-6938	4.6	13.11.2024 16:51:06	6.5 MB
<kuid2:833171:100937:4>	Ilyon	traincar	[бот] ТЭ3-7801	4.6	13.11.2024 16:51:06	6.5 MB

Входит в пакеты:

ТЭ3/7

Пак деталей для бото-локомотивов