VL60k interior [bot]

<kuid2:833171:100517:1>

Тип: Кабина
Загружено: 4.11.2024 7:58:54
Размер: 9.8 MB
Автор: Ilyon
Загрузил: Ilyon
Опубликовано: 4.11.2024 7:58:54
Скачиваний: 19
Скачать

Описание:

Interior for electric loco VL60
Миниатюра:

Конфигурация:

username                                "VL60k interior [bot]"
category-class                          "ZI"
cameradefault                           5
kind                                    "interior"
category-region                         "RU"
category-era                            "2000s"
trainz-build                            3.7
author                                  "Roman Norets aka theSEWEGI"
description                             "Interior for electric loco VL60"
mesh-table
{
  default
  {
    mesh                                "vl60_interior.im"
    auto-create                         1
  }
  pribory
  {
    mesh                                "pribory.im"
    att                                 "a.cntr_m"
    auto-create                         1
  }
  pribory_n
  {
    mesh                                "pribory_n.im"
    att                                 "a.cntr_m"
    auto-create                         0
  }
  kpdd
  {
    auto-create                         1
    mesh                                "kpdd.im"
    att                                 "a.speedo_needle"
    att-parent                          "default"
  }
  contr_m
  {
    mesh                                "contr_m.im"
    kind                                "lever"
    att                                 "a.cntr_m"
    auto-create                         1
    notches                             0,0.125,0.285,0.45,0.585,0.725,0.865,1
    notchheight                         0,0,0,0,0,0,0,0
    radius                              0.15
    mousespeed                          -0.1
    angles                              -0.174,2.268
    limits                              1,8
  }
  bloc
  {
    kind                                "lever"
    mesh                                "rbl367.im"
    att                                 "a.rbl367"
    auto-create                         1
    mousespeed                          -1
    radius                              0.05
    limits                              0,1
    angles                              0,-3.1
    notches                             0,1
    notchheight                         0,0
  }
  kran_254
  {
    mesh                                "254_ruchka.im"
    att                                 "a.254"
    auto-create                         1
    kind                                "lever"
    angles                              0,-2.9
    limits                              0,1
    att-parent                          "default"
    notches                             0.02,0.255,0.51,0.765,1
    notchheight                         0,0,0,0,0,0
    test-collisions                     1
    mousespeed                          -0.3
  }
  kran_394
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "394_ruchka.im"
    att                                 "a.394"
    limits                              0,1
    angles                              0,-2.164
    notches                             0,0.31,0.465,0.558,0.612,0.698,1
    notchheight                         0,0,0,0,0,0,0
    radius                              0.15
    mousespeed                          -0.6
    test-collisions                     1
  }
  wind_l
  {
    auto-create                         1
    mesh                                "wind_l2.im"
    att                                 "a.weiper_comm"
    att-parent                          "default"
    test-collisions                     0
  }
  wind_r
  {
    kind                                "animated-lever"
    auto-create                         1
    mesh                                "wind_r.im"
    anim                                "wind_r.kin"
    att                                 "a.window"
    limits                              0,1
    mousespeed                          -0.6
    att-parent                          "default"
  }
  sl2m
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "sl2m.im"
    att                                 "a.speedo_needle"
    limits                              0,46
    angles                              0,4.18
    att-parent                          "default"
  }
  clock_hr
  {
    mesh                                "hour.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.chasy"
    limits                              0,24
    angles                              0,6.283
    att-parent                          "default"
  }
  clock_min
  {
    mesh                                "minute.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.chasy"
    limits                              0,60
    angles                              0,6.283
    att-parent                          "default"
  }
  pos
  {
    kind                                "needle"
    att-parent                          "default"
    mesh                                "selsin.im"
    auto-create                         1
    att                                 "a.ur01"
    limits                              0,33
    angles                              0,6.02
    radius                              0.33
    value                               -2
  }
  revers
  {
    kind                                "lever"
    mesh                                "reverser.im"
    auto-create                         1
    att                                 "a.rev"
    limits                              0,1
    angles                              0,2.09
    notches                             0,0.25,0.5,0.7,0.85,1
    notchheight                         0,0,0,0,0,0,0
    mousespeed                          1
  }
  revers2
  {
    kind                                "lever"
    mesh                                "reverser.im"
    auto-create                         1
    att                                 "a.rev"
    limits                              0,1
    angles                              1.04,2.09
    notches                             0,0.3,0.6,1
    notchheight                         0,0,0,0
    mousespeed                          1
  }
  ampmeter_vu1
  {
    mesh                                "str_seti_new.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_pm01"
    limits                              0,750
    angles                              0,4.03
    att-parent                          "default"
    value                               -2
  }
  ampmeter_vu2
  {
    mesh                                "str_seti_new.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tc01"
    limits                              0,750
    angles                              0,4.03
    att-parent                          "default"
    value                               -2
  }
  voltmeter_seti
  {
    mesh                                "str_seti_new.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_pm03"
    limits                              0,30000
    angles                              0,4.014
    att-parent                          "default"
    value                               -2
  }
  voltmeter_needle
  {
    mesh                                "str_seti.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_pm02"
    limits                              0,3000
    angles                              0,3.993
    att-parent                          "default"
    value                               -2
  }
  strelka_cu
  {
    mesh                                "strelka_mn2.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.pom_gr"
    limits                              0,1000
    angles                              0,4.71
    value                               540
    att-parent                          "default"
  }
  strelka_gr
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.ur"
    limits                              0,1600
    angles                              0,4.71
    att-parent                          "default"
  }
  strelka_ur
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tc"
    limits                              0,1000
    angles                              0,4.59
    att-parent                          "default"
  }
  strelka_tm
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm"
    limits                              0,1000
    angles                              0,4.625
    att-parent                          "default"
  }
  strelka_tc
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.pm"
    limits                              0,1000
    angles                              0,4.71
    att-parent                          "default"
  }
  tifon
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch30"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  kpd_on
  {
    kind                                "lever"
    mesh                                "tumbler_small.im"
    att                                 "a.bf_lev05"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0.7,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  bf_red_left
  {
    kind                                "lever"
    mesh                                "tumbler_small.im"
    att                                 "a.bf_lev006"
    auto-create                         1
    mousespeed                          10
    radius                              2
    limits                              0,1
    angles                              -0.7,0.7
    notches                             0,1
    notchheight                         0,0
  }
  gvoff
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch01"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pantograph_1
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch04"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pantograph_2
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch05"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pant
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler_big.im"
    att                                 "a.switch03"
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.05
    att-parent                          "default"
  }
  cepi_upravleniya
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch06"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    onlight                             "switchlight1"
    att-parent                          "default"
  }
  radio
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch07"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  prog_tusklo
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch08"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator5
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch23"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pr_yarko
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler_big.im"
    att                                 "a.switch09"
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.05
    att-parent                          "default"
  }
  gvon
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch02"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  alsn
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch12"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  proverka_alsn
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch13"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  white_r_lamp
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch14"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  white_l_lamp
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch15"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  osveshenie_hod_chastey
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch17"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  svet_priborov
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch16"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  cab_yarko
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch19"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  cab_tusklo
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch20"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  obogrev_kabiny_2pechi
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch21"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  obogrev_kabiny_3pechi
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch18"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  swistok
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch22"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator4
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch24"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator3
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch25"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator2
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch26"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator1
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch27"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  kompressor
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch28"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator6
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch10"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  fazoraschepitel
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch29"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  avt_podsypka_peska
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch11"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ukbm_rb
  {
    mesh                                "ukbm_rb.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rb"
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    angles                              0,-0.003
    radius                              0.05
    mousespeed                          10
  }
  sandvalve
  {
    mesh                                "sandvalve.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.sand"
    limits                              0,1
    angles                              0,0.174
    mousespeed                          15
  }
  kn3
  {
    mesh                                "knr.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_group"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  kn1
  {
    mesh                                "knb1.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_group"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  kn2
  {
    mesh                                "knb2.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_group"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  epk
  {
    mesh                                "epk_key.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.epk"
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.05
  }
  mashlight
  {
    mesh                                "tumbler_large.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.mashlight"
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.05
  }
  vu
  {
    mesh                                "vu.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.vu"
    limits                              0,1
    angles                              0,0.698
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              5
  }
  eptp
  {
    mesh                                "avt_kor.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_pereclyuchateli001"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              0.05
  }
  eptm
  {
    mesh                                "avt_kor.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_reostatnie_kontaktory001"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              0.05
  }
  wiper_r
  {
    mesh                                "wiper_r.im"
    anim                                "wiper_r.kin"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.wiper_r1"
  }
  wiper_l
  {
    mesh                                "wiper_r.im"
    anim                                "wiper_r.kin"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.wiper_l"
  }
  reg_r
  {
    mesh                                "reg_wiper.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.wiper_r_reg"
    kind                                "lever"
    limits                              0,1
  }
  reg_l
  {
    mesh                                "reg_wiper.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.wiper_l_reg"
    kind                                "lever"
    limits                              0,1
  }
  wipers
  {
    mesh                                "wiper.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.weiper_comm"
    kind                                "lever"
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    angles                              0,1.57
  }
}
cameralist
{
  camera0                               -0.678,-0.507,1.528,6.202,-0.189
  camera1                               0.946,-0.528,1.313,6.27,-0.242
  camera2                               -0.506,-0.359,1.496,3.082,-0.01
  camera3                               -0.865,-0.511,1.095,5.367,-0.873
  camera4                               -0.86,-0.331,1.361,6.306,-0.237
  camera5                               0.7,-0.531,1.528,6.228,-0.15
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
kuid                                    <kuid2:833171:100517:1>
kuid-table
{
}
Файлы:

`knb1.im`	`476 B`
`knb2.im`	`476 B`
`hour.im`	`1.0 kB`
`lights-lights.texture.txt`	`47 B`
`knr.im`	`476 B`
`kpdd.im`	`1.2 kB`
`minute.im`	`2.2 kB`
`epk_key.im`	`6.6 kB`
`ept-ept.texture.txt`	`41 B`
`rbl367.im`	`3.9 kB`
`contr_m.im`	`17.9 kB`
`reg_wiper.im`	`2.2 kB`
`sandvalve.im`	`3.1 kB`
`selsin.im`	`658 B`
`reverser.im`	`10.2 kB`
`sl2m.im`	`8.9 kB`
`254_ruchka.im`	`27.0 kB`
`stekla-stekla.texture.txt`	`47 B`
`str_seti_new.im`	`658 B`
`str_seti.im`	`658 B`
`avt_kor.im`	`2.9 kB`
`394_ruchka.im`	`17.4 kB`
`tumbler_big.im`	`5.5 kB`
`strelka_mn2.im`	`13.0 kB`
`ukbm_rb.im`	`8.8 kB`
`vl60.gs`	`84 B`
`tumbler_large.im`	`7.9 kB`
`tumbler_small.im`	`11.3 kB`
`vl60.texture.txt`	`27 B`
`strelka_mn.im`	`12.9 kB`
`thumbnail.jpg`	`36.9 kB`
`vl60_1.texture.txt`	`29 B`
`pribory.im`	`143.7 kB`
`pribory_n.im`	`143.7 kB`
`vl60_10.texture.txt`	`30 B`
`vl60_10.jpg`	`180.6 kB`
`vl60_11.texture.txt`	`30 B`
`ept.tga`	`128.0 kB`
`vl60_12.texture.txt`	`30 B`
`vl60_11.jpg`	`393.7 kB`
`vl60_2.jpg`	`152.5 kB`
`vl60_2.texture.txt`	`29 B`
`vl60_1.jpg`	`685.8 kB`
`vl60_3.texture.txt`	`29 B`
`vl60_4.texture.txt`	`29 B`
`vl60.jpg`	`605.8 kB`
`vl60_3.jpg`	`223.0 kB`
`vl60_5.texture.txt`	`29 B`
`lights.tga`	`1.0 MB`
`vl60_6.texture.txt`	`29 B`
`vl60_7.texture.txt`	`29 B`
`vl60_12.jpg`	`839.0 kB`
`vl60_8.texture.txt`	`29 B`
`vl60_4.jpg`	`749.3 kB`
`vl60_9.texture.txt`	`29 B`
`vl60_5.jpg`	`694.4 kB`
`vu.im`	`7.5 kB`
`vl60_6.jpg`	`783.3 kB`
`wind_r.kin`	`364 B`
`wiper.im`	`3.6 kB`
`wind_l2.im`	`4.1 kB`
`wiper_r.kin`	`2.4 kB`
`wiper_r.im`	`7.6 kB`
`wind_r.im`	`53.6 kB`
`vl60_7.jpg`	`707.8 kB`
`vl60_8.jpg`	`712.4 kB`
`vl60_9.jpg`	`596.6 kB`
`stekla.tga`	`2.0 MB`
`vl60_interior.im`	`2.1 MB`
Общий объём файлов:	12.9 MB
Версии элемента:
Куид	Тип	Имя	Билд	Дата	Размер
<kuid2:833171:100517:1>	interior	VL60k interior [bot]	3.7	4.11.2024 7:58:54	9.8 MB
Зависимости:
Куид	Автор	Тип	Имя	Билд	Дата	Размер
Нет
Зависимые элементы:
Куид	Автор	Тип	Имя	Билд	Дата	Размер
<kuid2:833171:100540:8>	Ilyon	traincar	[бот] ВЛ60к-2558	4.6	13.11.2024 19:05:06	6.0 MB
<kuid2:833171:100545:8>	Ilyon	traincar	[бот] ВЛ60к-1199	4.6	13.11.2024 19:05:07	6.2 MB
<kuid2:833171:100547:8>	Ilyon	traincar	[бот] ВЛ60к-411	4.6	13.11.2024 19:05:07	5.5 MB
<kuid2:833171:100557:8>	Ilyon	traincar	[бот] ВЛ60к-445	4.6	13.11.2024 19:05:06	6.1 MB
Входит в пакеты:
ВЛ60к
Пак деталей для бото-локомотивов