VL80- interior [bot]

<kuid2:568300:100190:4>

Тип: Кабина
Загружено: 4.11.2024 8:41:29
Размер: 9.2 MB
Автор: Sandrilyon
Загрузил: Ilyon
Опубликовано: 4.11.2024 8:42:38
Скачиваний: 65

Скачать

Миниатюра:

Конфигурация:

username                                "VL80- interior [bot]"
kind                                    "interior"
cameradefault                           4
category-class                          "ZI"
author                                  "Rokky, Criminal, Don_Capone. Modif by SHEP Rom, Thesewegi, TimoDm"
category-region                         "RU"
category-era                            "1980s;1990s;2000s"
trainz-build                            3.7
interior-controls-type                  "full"
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
cameralist
{
  camera0                               -0.84,0.553,0.043,0,-0.147
  camera1                               -0.723,0.439,0.068,-0.516,-0.479
  camera2                               -0.911,0.214,-0.013,-1.881,-0.584
  camera3                               1.183,0.345,0.666,-3.162,0
  camera4                               0.917,0.405,0.258,0,-0.154
  camera5                               -0.791,0.77,0.068,0,-0.01
}
mesh-table
{
  default
  {
    mesh                                "interior_vl80s-985.im"
    auto-create                         1
  }
  attachments
  {
    mesh                                "attach_mesh.im"
    auto-create                         1
    att                                 "a.horn"
    att-parent                          "default"
  }
  zts
  {
    mesh                                "zts.im"
    kind                                "lever"
    att                                 "a.zts"
    auto-create                         1
    notches                             0,0.09,0.18,0.27,0.36,0.45,0.54,0.63,0.72,0.81,0.9,1
    notchheight                         1,1,1,1,1,1,1,1,1,1,1,1
    radius                              0.06
    mousespeed                          -0.3
    angles                              0,2.6
    limits                              0,1
  }
  svet_priborov
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch16"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  contr_m
  {
    mesh                                "contr_m.im"
    kind                                "lever"
    att                                 "a.cntr_m"
    auto-create                         1
    notches                             0,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         0,0,0,0,0,0,0,0
    radius                              0.15
    mousespeed                          -0.1
    angles                              0,2.6
    limits                              0,8
  }
  bloc
  {
    kind                                "lever"
    mesh                                "rbl367.im"
    att                                 "a.rbl367"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    limits                              0,1
    angles                              0,2
    notches                             0,1
    notchheight                         0,0
  }
  clock_hr
  {
    mesh                                "chasovaya.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.chasy"
    limits                              0,24
    angles                              0,6.283
    att-parent                          "default"
  }
  clock_min
  {
    mesh                                "minutnaya.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.chasy"
    limits                              0,60
    angles                              0,6.283
    att-parent                          "default"
  }
  edt_controller
  {
    mesh                                "dynamo.im"
    kind                                "lever"
    att                                 "a.dynamo"
    auto-create                         1
    radius                              0.295
    mousespeed                          -0.25
    notches                             0,0.12,0.22,0.3,0.32,0.34,0.36,0.38,0.4,0.42,0.44,0.46,0.48,0.5,0.52,0.54,0.56,0.58,0.6,0.62,0.64,0.66,0.68,0.7,0.72,0.74,0.76,0.78,0.8,0.82,0.84,0.86,0.88,0.9,0.92,0.94,0.96,0.98,1
    notchheight                         1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
    angles                              0,1.6
    limits                              0,1
    att-parent                          "default"
  }
  kran_254
  {
    mesh                                "254_ruchka.im"
    att                                 "a.ind_brake_lever"
    auto-create                         1
    kind                                "lever"
    angles                              0,-2.9
    limits                              0,4
    att-parent                          "default"
    test-collisions                     1
    mousespeed                          -0.2
  }
  kran_394
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "394_ruchka.im"
    att                                 "a.train_brake"
    limits                              0,1
    angles                              0,-2
    notches                             0,0.31,0.465,0.558,0.612,0.698,1
    notchheight                         1,1,1,1,1,1,1
    radius                              0.19
    att-parent                          "default"
    mousespeed                          -0.3
  }
  pos
  {
    mesh                                "selsin.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.pos"
    limits                              0,33
    angles                              0,6
    att-parent                          "default"
    value                               -2
  }
  revers
  {
    kind                                "lever"
    mesh                                "reverser.im"
    auto-create                         1
    att                                 "a.revers"
    limits                              0,1
    angles                              0,-1.3
    notches                             0,0.25,0.48,0.5,0.6,0.75,1
    notchheight                         1,1,0,1,1,1,1
    mousespeed                          1
  }
  ampmeter_vu1
  {
    mesh                                "str_seti.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.ampmeter_needle"
    limits                              0,1500
    angles                              0,4
    att-parent                          "default"
    value                               -2
  }
  ampmeter_vu2
  {
    mesh                                "str_seti.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.napryagenie"
    limits                              0,1500
    angles                              0,4
    att-parent                          "default"
  }
  voltmeter_needle
  {
    mesh                                "str_seti.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.pitanie"
    limits                              -1500,1500
    angles                              -2,2
    att-parent                          "default"
    value                               -2
  }
  voltmeter2_needle
  {
    mesh                                "str_seti.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.dvigatel"
    limits                              0,1500
    angles                              -0.07,4.08
    att-parent                          "default"
    value                               -2
  }
  sl2m
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "speedo_needle.im"
    att                                 "a.speedo_needle"
    limits                              0,46
    angles                              0,4.18
    att-parent                          "default"
  }
  speedo2_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "str_seti.im"
    att                                 "a.sk_p"
    limits                              0,150
    angles                              0,4
    att-parent                          "default"
    value                               -2
  }
  strelka_ur
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bplocomain"
    limits                              0,1000
    angles                              0,4.82
    att-parent                          "default"
  }
  strelka_gr
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bplocomain_needle"
    limits                              0,1600
    angles                              0,4.77
    att-parent                          "default"
  }
  bplocomain2_needle
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.pom_gl_r"
    limits                              0,1000
    angles                              0,4.77
    att-parent                          "default"
  }
  strelka_tm
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bptrainbrakepipe_needle"
    limits                              0,1000
    angles                              0,4.81
    att-parent                          "default"
  }
  strelka_tc
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bptrainbrakecylinder_needle"
    limits                              0,1000
    angles                              0,5.2
    att-parent                          "default"
  }
  pesok
  {
    mesh                                "Horn.IM"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.horn"
    limits                              0,1
    angles                              0,-0.09
    notches                             0,1
    notchheight                         1,1
  }
  tifon
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch30"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  gvoff
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch01"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pantograph_1
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch04"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pantograph_2
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch05"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pant
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler_big.im"
    att                                 "a.switch03"
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.05
    att-parent                          "default"
  }
  cepi_upravleniya
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch06"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    onlight                             "switchlight1"
    att-parent                          "default"
  }
  radio
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch07"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  prog_tusklo
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch08"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  signalisaciya
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch10"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pr_yarko
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler_big.im"
    att                                 "a.switch09"
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.05
    att-parent                          "default"
  }
  gvon
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch02"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  alsn
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch12"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  proverka_alsn
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch13"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  white_r_lamp
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch14"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  white_l_lamp
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch15"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  osveshenie_hod_chastey
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch17"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  cab_yarko
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch18"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  cab_tusklo
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch19"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  obogrev_kabiny_2pechi
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch20"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  obogrev_kabiny_3pechi
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch21"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  swistok
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch22"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventelyator4
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch23"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventelyator3
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch24"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventelyator2
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch25"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventelyator1
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch26"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  kompressor
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch27"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  vspom
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch28"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  fasoraschepitel
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch29"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  avt_podsypka_peska
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch11"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  osveshenie
  {
    kind                                "lever"
    mesh                                "tumbler_red_na_pulte.im"
    att                                 "a.swet_pr"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
  }
  sekcia1
  {
    kind                                "lever"
    mesh                                "tumbler_na_pulte_km.im"
    att                                 "a.sec1"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
  }
  sekcia2
  {
    kind                                "lever"
    mesh                                "tumbler_na_pulte_km.im"
    att                                 "a.sec2"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
  }
  sekcia3
  {
    kind                                "lever"
    mesh                                "tumbler_na_pulte_km.im"
    att                                 "a.sec3"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
  }
  sekcia4
  {
    kind                                "lever"
    mesh                                "tumbler_na_pulte_km.im"
    att                                 "a.sec4"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
  }
  ukbm_rb
  {
    mesh                                "rb_btn.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rb"
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    angles                              0,0.85
    radius                              0.05
    mousespeed                          10
  }
  epk
  {
    mesh                                "epk_key.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.epk1"
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
    radius                              1
  }
  wipers_tr_r
  {
    kind                                "lever"
    mesh                                "vkl_dv.im"
    auto-create                         1
    att                                 "a.vkl_stm"
    mousespeed                          0.3
    angles                              0,25
    limits                              0,1
  }
  wipers_tr_l
  {
    kind                                "lever"
    mesh                                "vkl_dv.im"
    auto-create                         1
    att                                 "a.vkl_stpm"
    mousespeed                          0.3
    angles                              0,25
    limits                              0,1
  }
  voltmetr_seti
  {
    mesh                                "str_seti.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.set"
    limits                              0,30000
    angles                              0,3.8
    att-parent                          "default"
    value                               -2
  }
  ob1
  {
    kind                                "pulllever"
    mesh                                "obogrev1.im"
    att                                 "a.tumblera_obogreva"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ob2
  {
    kind                                "pulllever"
    mesh                                "obogrev2.im"
    att                                 "a.tumblera_obogreva"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ob3
  {
    kind                                "pulllever"
    mesh                                "obogrev3.im"
    att                                 "a.tumblera_obogreva"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ob4
  {
    kind                                "pulllever"
    mesh                                "obogrev4.im"
    att                                 "a.tumblera_obogreva"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ob5
  {
    kind                                "lever"
    mesh                                "obogrev5.im"
    att                                 "a.tumblera_obogreva"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  epk_tumbler
  {
    kind                                "lever"
    mesh                                "tumbler_na_pulte_km.im"
    att                                 "a.epk_t"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
  }
  radio_ukv_tumbler
  {
    kind                                "lever"
    mesh                                "tumbler_na_pulte_km.im"
    att                                 "a.radioukv"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
  }
  radioswyaz_tumbler
  {
    kind                                "lever"
    mesh                                "tumbler_na_pulte_km.im"
    att                                 "a.radioswyaz"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
  }
  radio_kv_tumbler
  {
    kind                                "lever"
    mesh                                "tumbler_na_pulte_km.im"
    att                                 "a.radiokv"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
  }
  red_l_lamp
  {
    kind                                "lever"
    mesh                                "tumbler_na_pulte_km.im"
    att                                 "a.bf_lev"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
  }
  red_r_lamp
  {
    kind                                "lever"
    mesh                                "tumbler_na_pulte_km.im"
    att                                 "a.bf_praviy"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
  }
  ta_tokopriemniki
  {
    mesh                                "tumbler_avtomata_cherniy.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_tokopriemniki"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
  }
  ta_cepi_upraleniya
  {
    mesh                                "tumbler_avtomata_cherniy.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_cepi_upraleniya"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
  }
  ta_cepi_tormogeniya
  {
    mesh                                "tumbler_avtomata_cherniy.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_cepi_vspom"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              0.05
  }
  ta_reostatnie_kontaktory
  {
    mesh                                "tumbler_avtomata_korichnewiy.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_reostatnie_kontaktory"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              0.05
  }
  ta_pereclyuchateli
  {
    mesh                                "tumbler_avtomata_korichnewiy.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_cepi_tormogeniya"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
  }
  ta_alsn
  {
    mesh                                "tumbler_avtomata_korichnewiy.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_rezerv"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
  }
  ta_alsn01
  {
    mesh                                "tumbler_avtomata_cherniy.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_pereclyuchateli"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
  }
  ta_radio
  {
    mesh                                "tumbler_avtomata_cherniy.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_radio"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
  }
  ta_rezerv
  {
    mesh                                "tumbler_avtomata_korichnewiy.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_alsn"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
  }
  ta_cepi_vspom
  {
    mesh                                "tumbler_avtomata_korichnewiy.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_alsn01"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
  }
  ta_progector
  {
    mesh                                "tumbler_avtomata_korichnewiy.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_signalizaciya"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
  }
  ta_zashita_boks
  {
    mesh                                "tumbler_avtomata_korichnewiy.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_zashita_boks"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
  }
  ta_signalizaciya
  {
    mesh                                "tumbler_avtomata_cherniy.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_tifon_swistok"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
  }
  ta_tifon_swistok
  {
    mesh                                "tumbler_avtomata_korichnewiy.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_progector"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
  }
  kn1
  {
    mesh                                "knopka_red.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_group"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  horn1
  {
    mesh                                "knopka_black1.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_group"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  kn3
  {
    mesh                                "knopka_black2.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_group"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  r_wiper
  {
    mesh                                "wiper.im"
    auto-create                         1
    att                                 "a.dvornik_r"
    att-parent                          "attachments"
  }
  l_wiper
  {
    mesh                                "wiper.im"
    auto-create                         1
    att                                 "a.dvornik_l"
    att-parent                          "attachments"
  }
}
kuid                                    <kuid2:568300:100190:4>
kuid-table
{
}

Файлы:

`254_kran.texture.txt`	`31 B`
`367_blok.texture.txt`	`31 B`
`254_ruchka.im`	`15.1 kB`
`contr_m.im`	`20.2 kB`
`394_kran.texture.txt`	`31 B`
`deshifrator_alsn.texture.txt`	`39 B`
`chasovaya.im`	`1.0 kB`
`394_kran.jpg`	`95.0 kB`
`detali.texture.txt`	`29 B`
`254_kran.jpg`	`100.1 kB`
`detali1.texture.txt`	`30 B`
`394_ruchka.im`	`16.2 kB`
`attach_mesh.im`	`654 B`
`detali2.texture.txt`	`30 B`
`367_blok.jpg`	`131.9 kB`
`drova.texture.txt`	`28 B`
`dynamo.im`	`25.3 kB`
`deshifrator_alsn.jpg`	`224.4 kB`
`el_i_mn.texture.txt`	`30 B`
`epk.jpg`	`75.4 kB`
`epk.texture.txt`	`26 B`
`epk_key.im`	`6.0 kB`
`horn.im`	`2.8 kB`
`drova.jpg`	`258.4 kB`
`detali1.jpg`	`779.5 kB`
`kab.texture.txt`	`26 B`
`knopka_black1.im`	`5.2 kB`
`knopka_black2.im`	`5.2 kB`
`knopka_red.im`	`5.2 kB`
`kab.jpg`	`616.4 kB`
`lamps.texture.txt`	`28 B`
`minutnaya.im`	`2.3 kB`
`lamps.jpg`	`98.4 kB`
`nadpisi.texture.txt`	`30 B`
`obogrev1.im`	`3.6 kB`
`obogrev2.im`	`3.6 kB`
`obogrev3.im`	`3.6 kB`
`obogrev4.im`	`3.6 kB`
`obogrev5.im`	`3.6 kB`
`panel_1.texture.txt`	`30 B`
`el_i_mn.jpg`	`562.7 kB`
`pechi.texture.txt`	`28 B`
`pechi.jpg`	`132.5 kB`
`detali2.jpg`	`728.8 kB`
`pol.texture.txt`	`26 B`
`pr_st.jpg`	`73.3 kB`
`pr_st.texture.txt`	`28 B`
`pol.jpg`	`106.4 kB`
`nadpisi.jpg`	`424.7 kB`
`pribor.texture.txt`	`29 B`
`pribor.jpg`	`140.1 kB`
`provoda.texture.txt`	`30 B`
`pss.im`	`6.4 kB`
`detali.jpg`	`1.0 MB`
`pss.texture.txt`	`26 B`
`provoda.jpg`	`182.8 kB`
`panel_1.jpg`	`313.0 kB`
`pss_light.texture.txt`	`32 B`
`racia.texture.txt`	`28 B`
`pss.jpg`	`22.6 kB`
`rb.texture.txt`	`25 B`
`rb_btn.im`	`8.6 kB`
`rbl367.im`	`1.8 kB`
`reverser.im`	`6.7 kB`
`selsin.im`	`612 B`
`rb.jpg`	`98.4 kB`
`sl2m.texture.txt`	`27 B`
`pss_light.jpg`	`72.5 kB`
`sl2m_detali.texture.txt`	`34 B`
`speedo_needle.im`	`9.0 kB`
`stekla-stekla.texture.txt`	`47 B`
`str_seti.im`	`1.1 kB`
`strelka_mn.im`	`8.4 kB`
`sl2m.jpg`	`222.5 kB`
`sun_out.texture.txt`	`30 B`
`interior_vl80s-985.im`	`1.9 MB`
`svetofor.texture.txt`	`31 B`
`thumbnail.jpg`	`21.8 kB`
`racia.jpg`	`236.3 kB`
`tumbler_avtomata_cherniy.im`	`1.1 kB`
`tumbler_avtomata_korichnewiy.im`	`1.1 kB`
`tumbler_big.im`	`5.8 kB`
`tumbler_litle.im`	`7.9 kB`
`tumbler_na_pulte_km.im`	`10.5 kB`
`tumbler_red_na_pulte.im`	`10.2 kB`
`vkl_dv.im`	`1.5 kB`
`vkl_st.jpg`	`47.7 kB`
`vkl_st.texture.txt`	`29 B`
`wiper.im`	`4.5 kB`
`zts.im`	`5.0 kB`
`svetofor.jpg`	`109.1 kB`
`sun_out.jpg`	`312.5 kB`
`sl2m_detali.jpg`	`590.7 kB`
`tumb.tga`	`1.0 MB`
`stekla.tga`	`1.0 MB`
Общий объём файлов:	11.7 MB

Версии элемента:

Куид	Тип	Имя	Билд	Дата	Размер
<kuid2:568300:100190:4>	interior	VL80- interior [bot]	3.7	4.11.2024 8:42:38	9.2 MB

Зависимости:

Куид	Автор	Тип	Имя	Билд	Дата	Размер
Нет

Зависимые элементы:

Куид	Автор	Тип	Имя	Билд	Дата	Размер
<kuid2:568300:100192:11>	Sandrilyon	traincar	[бот] ВЛ80с-808 А	4.6	13.11.2024 19:58:12	7.4 MB
<kuid2:568300:100193:11>	Sandrilyon	traincar	[бот] ВЛ80с-808 Б	4.6	13.11.2024 19:58:12	61.9 kB
<kuid2:833171:100023:9>	Ilyon	traincar	[бот] VL80t-1062 А	4.6	13.11.2024 19:25:31	15.9 MB
<kuid2:833171:100037:7>	Ilyon	traincar	[бот] ВЛ80р-1793/1854 В	4.6	13.11.2024 19:17:06	9.8 MB
<kuid2:833171:100149:9>	Ilyon	traincar	[bot] VL80s-2333 A	4.6	13.11.2024 19:18:50	11.2 MB
<kuid2:833171:100150:8>	Ilyon	traincar	[bot] VL80s-2333 B	4.6	13.11.2024 19:18:51	64.7 kB
<kuid2:833171:100429:7>	Ilyon	traincar	[бот] ВЛ80р-1793/1854 А	4.6	13.11.2024 19:17:06	9.9 MB
<kuid2:833171:100460:4>	Ilyon	traincar	[бот] ВЛ80р-1793/1854 Б	4.6	13.11.2024 19:17:04	10.6 MB
<kuid2:833171:100488:8>	Ilyon	traincar	[бот] VL80t-1157 Б	4.6	13.11.2024 19:25:30	69.4 kB
<kuid2:833171:100494:9>	Ilyon	traincar	[бот] VL80t-1157 А	4.6	13.11.2024 19:25:30	7.7 MB
<kuid2:833171:100524:9>	Ilyon	traincar	[бот] VL80t-805 А	4.6	13.11.2024 19:25:34	14.3 MB
<kuid2:833171:100525:8>	Ilyon	traincar	[бот] VL80t-805 А	4.6	13.11.2024 19:25:34	70.9 kB
<kuid2:833171:100527:8>	Ilyon	traincar	[бот] VL80t-1062 Б	4.6	13.11.2024 19:25:31	69.7 kB
<kuid2:833171:100528:8>	Ilyon	traincar	[бот] VL80t-1438 Б	4.6	13.11.2024 19:25:29	61.8 kB
<kuid2:833171:100529:9>	Ilyon	traincar	[бот] VL80t-1241 Б	4.6	13.11.2024 19:25:30	64.6 kB
<kuid2:833171:100530:8>	Ilyon	traincar	[бот] VL80t-718 Б	4.6	13.11.2024 19:25:35	65.6 kB
<kuid2:833171:100531:9>	Ilyon	traincar	[бот] VL80t-718 А	4.6	13.11.2024 19:25:35	7.1 MB
<kuid2:833171:100532:9>	Ilyon	traincar	[бот] VL80t-1438 А	4.6	13.11.2024 19:25:29	15.7 MB
<kuid2:833171:100533:9>	Ilyon	traincar	[бот] VL80t-1241 А	4.6	13.11.2024 19:25:29	5.3 MB
<kuid2:833171:100558:7>	Ilyon	traincar	[бот] ВЛ80р-1800/1749 А	4.6	13.11.2024 19:17:03	9.5 MB
<kuid2:833171:100559:9>	Ilyon	traincar	[бот] ВЛ80р-1800/1749 В	4.6	13.11.2024 19:17:07	9.4 MB
<kuid2:833171:100560:5>	Ilyon	traincar	[бот] ВЛ80р-1800/1749 Б	4.6	13.11.2024 19:17:05	10.4 MB
<kuid2:833171:100561:11>	Ilyon	traincar	[бот] ВЛ80р-1626 А	4.6	13.11.2024 19:17:04	11.4 MB
<kuid2:833171:100562:11>	Ilyon	traincar	[бот] ВЛ80р-1626 Б	4.6	13.11.2024 19:17:02	11.7 MB
<kuid2:833171:100563:8>	Ilyon	traincar	[бот] VL80t-929 Б	4.6	13.11.2024 19:25:32	66.2 kB
<kuid2:833171:100564:9>	Ilyon	traincar	[бот] VL80t-913 А	4.6	13.11.2024 19:25:33	12.3 MB
<kuid2:833171:100565:10>	Ilyon	traincar	[бот] VL80t-929 А	4.6	13.11.2024 19:25:32	12.3 MB
<kuid2:833171:100566:8>	Ilyon	traincar	[бот] VL80t-913 Б	4.6	13.11.2024 19:25:33	66.0 kB
<kuid2:833171:100567:8>	Ilyon	traincar	[бот] VL80t-818 Б	4.6	13.11.2024 19:25:34	67.8 kB
<kuid2:833171:100568:9>	Ilyon	traincar	[бот] VL80t-818 А	4.6	13.11.2024 19:25:33	13.2 MB
<kuid2:833171:101027:10>	Ilyon	traincar	[bot] VL80s-2323 A	4.6	13.11.2024 19:18:48	11.4 MB
<kuid2:833171:101028:9>	Ilyon	traincar	[bot] VL80s-2323 B	4.6	13.11.2024 19:18:51	65.3 kB
<kuid2:833171:101058:7>	Ilyon	traincar	[bot] VL80s-845 A	4.6	13.11.2024 19:18:49	5.4 MB
<kuid2:833171:101059:7>	Ilyon	traincar	[bot] VL80s-845 B	4.6	13.11.2024 19:18:51	65.4 kB
<kuid2:833171:101060:7>	Ilyon	traincar	[bot] VL80s-894 A	4.6	13.11.2024 19:18:50	8.1 MB
<kuid2:833171:101061:7>	Ilyon	traincar	[bot] VL80s-894 B	4.6	13.11.2024 19:18:51	63.8 kB
<kuid2:833171:101062:7>	Ilyon	traincar	[bot] VL80s-855 A	4.6	13.11.2024 19:18:48	6.5 MB
<kuid2:833171:101063:7>	Ilyon	traincar	[bot] VL80s-855 B	4.6	13.11.2024 19:18:51	64.9 kB
<kuid2:833171:101113:9>	Ilyon	traincar	[bot] VL80s-476 A	4.6	13.11.2024 19:18:47	11.7 MB
<kuid2:833171:101114:8>	Ilyon	traincar	[bot] VL80s-476 B	4.6	13.11.2024 19:18:51	69.8 kB

Входит в пакеты:

ВЛ80р

ВЛ80с

ВЛ80т

Пак деталей для бото-локомотивов